Return to site
Return to site

Send Message To Ip Address Range

broken image


  1. Send Message To Ip Address Range 16
  2. Send Message To Ip Address

Send Message To Ip Address

    ip address
  • A unique string of numbers separated by periods that identifies each computer attached to the Internet
  • An Internet Protocol address (IP address) is a numerical label that is assigned to any device participating in a computer network that uses the Internet Protocol for communication between its nodes.
  • (IP Addresses) We use IP addresses to analyse trends, administer our site and track your movements whilst on our site. IP addresses do not supply us with personally identifiable data.
  • (Internet Protocol address) A number assigned to each computer's or other device's network interface(s) which are active on a network supporting the Internet Protocol, in order to distinguish each network interface (and hence each networked device) from every other network interface anywhere on
    message
  • what a communication that is about something is about
  • An official or formal communication, esp. a speech delivered by a head of state to a legislative assembly or the public
  • a communication (usually brief) that is written or spoken or signaled; 'he sent a three-word message'
  • A verbal, written, or recorded communication sent to or left for a recipient who cannot be contacted directly
    send
  • mail: cause to be directed or transmitted to another place; 'send me your latest results'; 'I'll mail you the paper when it's written'
  • Cause to go or be taken to a particular destination; arrange for the delivery of, esp. by mail
  • cause to go somewhere; 'The explosion sent the car flying in the air'; 'She sent her children to camp'; 'He directed all his energies into his dissertation'
  • to cause or order to be taken, directed, or transmitted to another place; 'He had sent the dispatches downtown to the proper people and had slept'
  • Order or instruct to go to a particular destination or in a particular direction
send message to ip address - Fashion Bronze
Fashion Bronze Pyramid Punk Studs Mobile Phone Back Cover for iPhone 4/4S Skin
Popular Mobile Phone Protective Case for iPhone 4/4S
Hard Case with Real Handcraft
Back Case with Bronze Studs Decoration and Flower Pattern
Punk Style Design,easy access to accessories,no need to remove case for earphone,recharge etc
Actual Bronze Studs Decoration seems not shiny like the picture shows.It is caused by autoxidation,but not second hand
Cross mark sometimes will look unstraight because of real handcraft can not ensure 100% perfect straight.please understand.
And pictures are taken by ourselves.Due to photographing technique, sometimes actual color might look different from that on picture shows. But we will ensure ship right goods. Pls understand.
It is better to supply contact phone number because sometimes shipping company leave notice to receiver but no one at home or on a business trip. So parcel can not be delivered to receiver timely and we can not contact receiver timely either.
we promise not to release buyer's contact phone number to anyone others and we will not send advertising message or make advertisement calling.
The phone number only be used on the shipping note which can be seen by the shipping company for delivering goods conveniently or we only use it to contact with receiver for any problem about order details,shipping problem or item problem. Of course, this is Not a must-have requirement. If you think this is right and reasonable, it is better to leave phone number in shipping address. Thanks for understanding
Beijing - children in Tian'anmen Square
The text of the verdict in the case of journalist Shi Tao - sentenced in April to 10 years in prison for 'divulging state secrets abroad' - shows that Yahoo! Holdings (Hong Kong) Ltd. provided China's state security authorities with details that helped to identify and convict him (Reporters Without Borders)
Aged 37, Shi worked for the daily Dangdai Shang Bao (Contemporary Business News). He was convicted on 30 April of sending foreign-based websites the text of an internal message which the authorities had sent to his newspaper warning journalists of the dangers of social destabilisation and risks resulting from the return of certain dissidents on the 15th anniversary of the Tiananmen Square massacre.
Translated into English by the Dui Hua Foundation (which works to document the cases of Chinese political prisoners), the verdict reveals that Yahoo! Holdings (Hong Kong) Ltd. provided the Chinese investigating organs with detailed information that apparently enabled them to link Shi's personal e-mail account (huoyan-1989@yahoo.com.cn) and the specific message containing information treated as a 'state secret' to the IP address of his computer.
S200 S220 S240 GPRS Data Logger RTU with SACADA USB Relay ouput
Features Direct connection to the GSM GPRS Network; Transparent Serial Data Tunnelling using low cost SMS/GPRS network; Remote Configuration by SMS Messages or GPRS; Upload data via GPRS or SMS on Schedule or event occurs; Supports Dynamic Domain name or fixed IP address; Supports SMS, CSD, GPRS, UDP and TCP/IP protocols; Supports Modbus RTU protocols; 1 RS232 Serial Ports, and 2 RS485 Serial Ports; 6 Digital Inputs can send Alarm Messages by SMS or GPRS; 6 Pulse Counter Inputs; 4 Digital Outputs; 10 Analogue Inputs. (12 bit resolution, 0-10V or 0-53mA); PC Programming Interface; Power supply 8V to 24V; Size: 125mm* 80mm* 30mm.
send message to ip address
Note: This item is shipped from China(Hong Kong); Delievey time: 10-15 business days.
Available Color: Black / White; Please write down your favourite color by Amazon Message / Email! if no declaration,we will send this item out in black !
Description
Every single case water tasted
To give you the confidence to go everywhere and do everything with your iPhone 5, we water test every case we make. Then, we send it to an independent agent for additional testing, including a second water test on randomly selected cases. Only cases that pass are shipped. At LifeProof, we use our cases everyday for everything, and if we trust them, you can too!
MIL STD 810 F is the standard that addresses a broad range of environmental conditions, with MIL STD 810F-516 being the section of the standard that is specific to functional drop. This may include an assessment of the overall material system integrity for safety purposes in any one or all of the handling, transportation, and service environments.
IEL 60529 is the standard for Ingress Protection from water and dust for enclosures. IP-68 is the most rigorous classification in this specification. The first characteristic number describes protection from solid foreign objects. An enclosure with a characteristic number of 6 can withstand exposure to circulating talcum powder for 8 hours with no dust ingress after that period. The second characteristic number describes protection against water. An enclosure with a characteristic number of 8 exceeds all other water protection levels and is specified by the manufacturer. For LifeProof, number 8 signifies LifeProof cases will withstand immersion in water to a depth of 2 meters / 6.6 feet for 30 minutes.
Package
1 x Waterproof Case

To add an additional dedicated IP Address: In the left navigation, select Settings and then click IP Addresses. Here you'll see a list of your current d IPs. Your IPs in warmup will have a 'warmup' label. Click Add an IP Address. Select the number of IP addresses you would like to purchase. Under 'Additional Options' you will find the following. Feb 20, 2020 The correct IP address isn't contained in the last Received line because information faked by a sender appears at the bottom of an email header. To find the correct address: Start from the last Received line and trace the path taken by the message by traveling up through the header.

-->

I'm trying to find out how to send text based or another type of message though command prompt directly to another person's computer just knowing their IP address. Please help me out! System Configuration: Windows Vista Safari 530.5. An Internet Protocol address (IP address) is a numerical label that is assigned to any device participating in a computer network that uses the Internet Protocol for communication between its nodes. (IP Addresses) We use IP addresses to analyse trends, administer our.

Send Message To Ip Address Range

Conditions and exceptions in mail flow rules (also known as transport rules) identify the messages that the rule is applied to or not applied to. For example, if the rule adds a disclaimer to messages, you can configure the rule to only apply to messages that contain specific words, messages sent by specific users, or to all messages except those sent by the members of a specific distribution group. Collectively, the conditions and exceptions in mail flow rules are also known as predicates, because for every condition, there's a corresponding exception that uses the exact same settings and syntax. The only difference is conditions specify messages to include, while exceptions specify messages to exclude.

Most conditions and exceptions have one property that requires one or more values. For example, the The sender is condition requires the sender of the message. Some conditions have two properties. For example, the A message header includes any of these words condition requires one property to specify the message header field, and a second property to specify the text to look for in the header field. Some conditions or exceptions don't have any properties. For example, the Any attachment has executable content condition simply looks for attachments in messages that have executable content.

For more information about mail flow rules in Exchange Online, including how multiple conditions/exceptions or multi-valued conditions/exceptions are handled, see Mail flow rules (transport rules) in Exchange Online.

Conditions and exceptions for mail flow rules in Exchange Online

The tables in the following sections describe the conditions and exceptions that are available in mail flow rules in Exchange Online. The property types are described in the Property types section.

Notes:

Send Message To Ip Address Range 16

  • After you select a condition or exception in the Exchange admin center (EAC), the value that's ultimately shown in the Apply this rule if or Except if field is often different (shorter) than the click path value you selected. Also, when you create new rules based on a template (a filtered list of scenarios), you can often select a short condition name instead of following the complete click path. The short names and full click path values are shown in the EAC column in the tables.

  • If you select [Apply to all messages] in the EAC, you can't specify any other conditions. The equivalent in Exchange Online PowerShell is to create a rule without specifying any condition parameters.

  • The settings and properties are the same in conditions and exceptions, so the output of the Get-TransportRulePredicate cmdlet doesn't list exceptions separately. Also, the names of some of the predicates that are returned by this cmdlet are different than the corresponding parameter names, and a predicate might require multiple parameters.

Senders

For conditions and exceptions that examine the sender's address, you can specify where rule looks for the sender's address.

In the EAC, in the Properties of this rule section, click Match sender address in message. Note that you might need to click More options to see this setting. In Exchange Online PowerShell, the parameter is SenderAddressLocation. The available values are:

  • Header: Only examine senders in the message headers (for example, the From, Sender, or Reply-To fields). This is the default value.

  • Envelope: Only examine senders from the message envelope (the MAIL FROM value that was used in the SMTP transmission, which is typically stored in the Return-Path field). Note that message envelope searching is only available for the following conditions (and the corresponding exceptions):

    • The sender is(From)

    • The sender is a member of(FromMemberOf)

    • The sender address includes(FromAddressContainsWords)

    • The sender address matches(FromAddressMatchesPatterns)

    • The sender's domain is(SenderDomainIs)

  • Header or envelope ( HeaderOrEnvelope) Examine senders in the message header and the message envelope.

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The sender is
The sender > is this person		From
ExceptIfFrom		AddressesMessages that are sent by the specified mailboxes, mail users, mail contacts, or Microsoft 365 groups in the organization.
For more information about using Microsoft 365 groups with this condition, see the Addresses entry in the Property types section.
The sender is located
The sender > is external/internal		FromScope
ExceptIfFromScope		UserScopeFromMessages that are sent by either internal senders or external senders.
The sender is a member of
The sender > is a member of this group		FromMemberOf
ExceptIfFromMemberOf		AddressesMessages that are sent by a member of the specified distribution group, mail-enabled security group, or Microsoft 365 group.
For more information about using Microsoft 365 groups with this condition, see the Addresses entry in the Property types section.
The sender address includes
The sender > address includes any of these words		FromAddressContainsWords
ExceptIfFromAddressContainsWords		WordsMessages that contain the specified words in the sender's email address.
The sender address matches
The sender > address matches any of these text patterns		FromAddressMatchesPatterns
ExceptIfFromAddressMatchesPatterns		PatternsMessages where the sender's email address contains text patterns that match the specified regular expressions.
The sender is on a recipient's list
The sender > is on a recipient's supervision list		SenderInRecipientList
ExceptIfSenderInRecipientList		SupervisionListMessages where the sender is on the recipient's Allow list or Block list.
The sender's specified properties include any of these words
The sender > has specific properties including any of these words		SenderADAttributeContainsWords
ExceptIfSenderADAttributeContainsWords		First property: ADAttribute
Second property: Words		Messages where the specified Active Directory attribute of the sender contains any of the specified words.
Note that the Country attribute requires the two-letter country code value (for example, DE for Germany).
The sender's specified properties match these text patterns
The sender > has specific properties matching these text patterns		SenderADAttributeMatchesPatterns
ExceptIfSenderADAttributeMatchesPatterns		First property: ADAttribute
Second property: Patterns		Messages where the specified Active Directory attribute of the sender contains text patterns that match the specified regular expressions.
The sender has overridden the Policy Tip
The sender > has overridden the Policy Tip		HasSenderOverride
ExceptIfHasSenderOverride		n/aMessages where the sender has chosen to override a data loss prevention (DLP) policy. For more information about DLP policies, see Data loss prevention.
Note: This condition/exception isn't available in standalone Exchange Online Protection (EOP) environments.
Sender's IP address is in the range
The sender > IP address is in any of these ranges or exactly matches		SenderIPRanges
ExceptIfSenderIPRanges		IPAddressRangesMessages where the sender's IP address matches the specified IP address, or falls within the specified IP address range.
The sender's domain is
The sender > domain is		SenderDomainIs
ExceptIfSenderDomainIs		DomainNameMessages where the domain of the sender's email address matches the specified value.
If you need to find sender domains that contain the specified domain (for example, any subdomain of a domain), use The sender address matches(FromAddressMatchesPatterns) condition and specify the domain by using the syntax: '.domain.com$'.

Recipients

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The recipient is
The recipient > is this person		SentTo
ExceptIfSentTo		AddressesMessages where one of the recipients is the specified mailbox, mail user, or mail contact in the organization. The recipients can be in the To, Cc, or Bcc fields of the message.
Note: You can't specify distribution groups, mail-enabled security groups, or Microsoft 365 groups. If you need to take action on messages that are sent to a group, use the To box contains(AnyOfToHeader) condition instead.
The recipient is located
The recipient > is external/external		SentToScope
ExceptIfSentToScope		UserScopeToMessages that are sent to internal or external recipients.
The recipient is a member of
The recipient > is a member of this group		SentToMemberOf
ExceptIfSentToMemberOf		AddressesMessages that contain recipients who are members of the specified distribution group, mail-enabled security group, or Microsoft 365 group. The group can be in the To, Cc, or Bcc fields of the message.
For more information about using Microsoft 365 groups with this condition, see the Addresses entry in the Property types section.
The recipient address includes
The recipient > address includes any of these words		RecipientAddressContainsWords
ExceptIfRecipientAddressContainsWords		WordsMessages that contain the specified words in the recipient's email address.
Note: This condition doesn't consider messages that are sent to recipient proxy addresses. It only matches messages that are sent to the recipient's primary email address.
The recipient address matches
The recipient > address matches any of these text patterns		RecipientAddressMatchesPatterns
ExceptIfRecipientAddressMatchesPatterns		PatternsMessages where a recipient's email address contains text patterns that match the specified regular expressions.
Note: This condition doesn't consider messages that are sent to recipient proxy addresses. It only matches messages that are sent to the recipient's primary email address.
The recipient is on the sender's list
The recipient > is on the sender's supervision list		RecipientInSenderList
ExceptIfRecipientInSenderList		SupervisionListMessages where the recipient is on the sender's Allow list or Block list.
The recipient's specified properties include any of these words
The recipient > has specific properties including any of these words		RecipientADAttributeContainsWords
ExceptIfRecipientADAttributeContainsWords		First property: ADAttribute
Second property: Words		Messages where the specified Active Directory attribute of a recipient contains any of the specified words.
Note that the Country attribute requires the two-letter country code value (for example, DE for Germany).
The recipient's specified properties match these text patterns
The recipient > has specific properties matching these text patterns		RecipientADAttributeMatchesPatterns
ExceptIfRecipientADAttributeMatchesPatterns		First property: ADAttribute
Second property: Patterns		Messages where the specified Active Directory attribute of a recipient contains text patterns that match the specified regular expressions.
A recipient's domain is
The recipient > domain is		RecipientDomainIs
ExceptIfRecipientDomainIs		DomainNameMessages where the domain of a recipient's email address matches the specified value.
If you need to find recipient domains that contain the specified domain (for example, any subdomain of a domain), use The recipient address matches (RecipientAddressMatchesPatterns) condition, and specify the domain by using the syntax '.domain.com$'.
Send message to ip address

Conditions and exceptions in mail flow rules (also known as transport rules) identify the messages that the rule is applied to or not applied to. For example, if the rule adds a disclaimer to messages, you can configure the rule to only apply to messages that contain specific words, messages sent by specific users, or to all messages except those sent by the members of a specific distribution group. Collectively, the conditions and exceptions in mail flow rules are also known as predicates, because for every condition, there's a corresponding exception that uses the exact same settings and syntax. The only difference is conditions specify messages to include, while exceptions specify messages to exclude.

Most conditions and exceptions have one property that requires one or more values. For example, the The sender is condition requires the sender of the message. Some conditions have two properties. For example, the A message header includes any of these words condition requires one property to specify the message header field, and a second property to specify the text to look for in the header field. Some conditions or exceptions don't have any properties. For example, the Any attachment has executable content condition simply looks for attachments in messages that have executable content.

For more information about mail flow rules in Exchange Online, including how multiple conditions/exceptions or multi-valued conditions/exceptions are handled, see Mail flow rules (transport rules) in Exchange Online.

Conditions and exceptions for mail flow rules in Exchange Online

The tables in the following sections describe the conditions and exceptions that are available in mail flow rules in Exchange Online. The property types are described in the Property types section.

Notes:

Send Message To Ip Address Range 16

  • After you select a condition or exception in the Exchange admin center (EAC), the value that's ultimately shown in the Apply this rule if or Except if field is often different (shorter) than the click path value you selected. Also, when you create new rules based on a template (a filtered list of scenarios), you can often select a short condition name instead of following the complete click path. The short names and full click path values are shown in the EAC column in the tables.

  • If you select [Apply to all messages] in the EAC, you can't specify any other conditions. The equivalent in Exchange Online PowerShell is to create a rule without specifying any condition parameters.

  • The settings and properties are the same in conditions and exceptions, so the output of the Get-TransportRulePredicate cmdlet doesn't list exceptions separately. Also, the names of some of the predicates that are returned by this cmdlet are different than the corresponding parameter names, and a predicate might require multiple parameters.

Senders

For conditions and exceptions that examine the sender's address, you can specify where rule looks for the sender's address.

In the EAC, in the Properties of this rule section, click Match sender address in message. Note that you might need to click More options to see this setting. In Exchange Online PowerShell, the parameter is SenderAddressLocation. The available values are:

  • Header: Only examine senders in the message headers (for example, the From, Sender, or Reply-To fields). This is the default value.

  • Envelope: Only examine senders from the message envelope (the MAIL FROM value that was used in the SMTP transmission, which is typically stored in the Return-Path field). Note that message envelope searching is only available for the following conditions (and the corresponding exceptions):

    • The sender is(From)

    • The sender is a member of(FromMemberOf)

    • The sender address includes(FromAddressContainsWords)

    • The sender address matches(FromAddressMatchesPatterns)

    • The sender's domain is(SenderDomainIs)

  • Header or envelope ( HeaderOrEnvelope) Examine senders in the message header and the message envelope.

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The sender is
The sender > is this person		From
ExceptIfFrom		AddressesMessages that are sent by the specified mailboxes, mail users, mail contacts, or Microsoft 365 groups in the organization.
For more information about using Microsoft 365 groups with this condition, see the Addresses entry in the Property types section.
The sender is located
The sender > is external/internal		FromScope
ExceptIfFromScope		UserScopeFromMessages that are sent by either internal senders or external senders.
The sender is a member of
The sender > is a member of this group		FromMemberOf
ExceptIfFromMemberOf		AddressesMessages that are sent by a member of the specified distribution group, mail-enabled security group, or Microsoft 365 group.
For more information about using Microsoft 365 groups with this condition, see the Addresses entry in the Property types section.
The sender address includes
The sender > address includes any of these words		FromAddressContainsWords
ExceptIfFromAddressContainsWords		WordsMessages that contain the specified words in the sender's email address.
The sender address matches
The sender > address matches any of these text patterns		FromAddressMatchesPatterns
ExceptIfFromAddressMatchesPatterns		PatternsMessages where the sender's email address contains text patterns that match the specified regular expressions.
The sender is on a recipient's list
The sender > is on a recipient's supervision list		SenderInRecipientList
ExceptIfSenderInRecipientList		SupervisionListMessages where the sender is on the recipient's Allow list or Block list.
The sender's specified properties include any of these words
The sender > has specific properties including any of these words		SenderADAttributeContainsWords
ExceptIfSenderADAttributeContainsWords		First property: ADAttribute
Second property: Words		Messages where the specified Active Directory attribute of the sender contains any of the specified words.
Note that the Country attribute requires the two-letter country code value (for example, DE for Germany).
The sender's specified properties match these text patterns
The sender > has specific properties matching these text patterns		SenderADAttributeMatchesPatterns
ExceptIfSenderADAttributeMatchesPatterns		First property: ADAttribute
Second property: Patterns		Messages where the specified Active Directory attribute of the sender contains text patterns that match the specified regular expressions.
The sender has overridden the Policy Tip
The sender > has overridden the Policy Tip		HasSenderOverride
ExceptIfHasSenderOverride		n/aMessages where the sender has chosen to override a data loss prevention (DLP) policy. For more information about DLP policies, see Data loss prevention.
Note: This condition/exception isn't available in standalone Exchange Online Protection (EOP) environments.
Sender's IP address is in the range
The sender > IP address is in any of these ranges or exactly matches		SenderIPRanges
ExceptIfSenderIPRanges		IPAddressRangesMessages where the sender's IP address matches the specified IP address, or falls within the specified IP address range.
The sender's domain is
The sender > domain is		SenderDomainIs
ExceptIfSenderDomainIs		DomainNameMessages where the domain of the sender's email address matches the specified value.
If you need to find sender domains that contain the specified domain (for example, any subdomain of a domain), use The sender address matches(FromAddressMatchesPatterns) condition and specify the domain by using the syntax: '.domain.com$'.

Recipients

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The recipient is
The recipient > is this person		SentTo
ExceptIfSentTo		AddressesMessages where one of the recipients is the specified mailbox, mail user, or mail contact in the organization. The recipients can be in the To, Cc, or Bcc fields of the message.
Note: You can't specify distribution groups, mail-enabled security groups, or Microsoft 365 groups. If you need to take action on messages that are sent to a group, use the To box contains(AnyOfToHeader) condition instead.
The recipient is located
The recipient > is external/external		SentToScope
ExceptIfSentToScope		UserScopeToMessages that are sent to internal or external recipients.
The recipient is a member of
The recipient > is a member of this group		SentToMemberOf
ExceptIfSentToMemberOf		AddressesMessages that contain recipients who are members of the specified distribution group, mail-enabled security group, or Microsoft 365 group. The group can be in the To, Cc, or Bcc fields of the message.
For more information about using Microsoft 365 groups with this condition, see the Addresses entry in the Property types section.
The recipient address includes
The recipient > address includes any of these words		RecipientAddressContainsWords
ExceptIfRecipientAddressContainsWords		WordsMessages that contain the specified words in the recipient's email address.
Note: This condition doesn't consider messages that are sent to recipient proxy addresses. It only matches messages that are sent to the recipient's primary email address.
The recipient address matches
The recipient > address matches any of these text patterns		RecipientAddressMatchesPatterns
ExceptIfRecipientAddressMatchesPatterns		PatternsMessages where a recipient's email address contains text patterns that match the specified regular expressions.
Note: This condition doesn't consider messages that are sent to recipient proxy addresses. It only matches messages that are sent to the recipient's primary email address.
The recipient is on the sender's list
The recipient > is on the sender's supervision list		RecipientInSenderList
ExceptIfRecipientInSenderList		SupervisionListMessages where the recipient is on the sender's Allow list or Block list.
The recipient's specified properties include any of these words
The recipient > has specific properties including any of these words		RecipientADAttributeContainsWords
ExceptIfRecipientADAttributeContainsWords		First property: ADAttribute
Second property: Words		Messages where the specified Active Directory attribute of a recipient contains any of the specified words.
Note that the Country attribute requires the two-letter country code value (for example, DE for Germany).
The recipient's specified properties match these text patterns
The recipient > has specific properties matching these text patterns		RecipientADAttributeMatchesPatterns
ExceptIfRecipientADAttributeMatchesPatterns		First property: ADAttribute
Second property: Patterns		Messages where the specified Active Directory attribute of a recipient contains text patterns that match the specified regular expressions.
A recipient's domain is
The recipient > domain is		RecipientDomainIs
ExceptIfRecipientDomainIs		DomainNameMessages where the domain of a recipient's email address matches the specified value.
If you need to find recipient domains that contain the specified domain (for example, any subdomain of a domain), use The recipient address matches (RecipientAddressMatchesPatterns) condition, and specify the domain by using the syntax '.domain.com$'.

Message subject or body

Note

The search for words or text patterns in the subject or other header fields in the message occurs after the message has been decoded from the MIME content transfer encoding method that was used to transmit the binary message between SMTP servers in ASCII text. You can't use conditions or exceptions to search for the raw (typically, Base64) encoded values of the subject or other header fields in messages.

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The subject or body includes
The subject or body > subject or body includes any of these words		SubjectOrBodyContainsWords
ExceptIfSubjectOrBodyContainsWords		WordsMessages that have the specified words in the Subject field or message body.
The subject or body matches
The subject or body > subject or body matches these text patterns		SubjectOrBodyMatchesPatterns
ExceptIfSubjectOrBodyMatchesPatterns		PatternsMessages where the Subject field or message body contain text patterns that match the specified regular expressions.
The subject includes
The subject or body > subject includes any of these words		SubjectContainsWords
ExceptIfSubjectContainsWords		WordsMessages that have the specified words in the Subject field.
The subject matches
The subject or body > subject matches these text patterns		SubjectMatchesPatterns
ExceptIfSubjectMatchesPatterns		PatternsMessages where the Subject field contains text patterns that match the specified regular expressions.

Attachments

For more information about how mail flow rules inspect message attachments, see Use mail flow rules to inspect message attachments in Exchange Online.

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
Any attachment's content includes
Any attachment > content includes any of these words		AttachmentContainsWords
ExceptIfAttachmentContainsWords		WordsMessages where an attachment contains the specified words.
Any attachments content matches
Any attachment > content matches these text patterns		AttachmentMatchesPatterns
ExceptIfAttachmentMatchesPatterns		PatternsMessages where an attachment contains text patterns that match the specified regular expressions.
Note: Only the first 150 kilobytes (KB) of the attachments are scanned.
Any attachment's content can't be inspected
Any attachment > content can't be inspected		AttachmentIsUnsupported
ExceptIfAttachmentIsUnsupported		n/aMessages where an attachment isn't natively recognized by Exchange Online.
Any attachment's file name matches
Any attachment > file name matches these text patterns		AttachmentNameMatchesPatterns
ExceptIfAttachmentNameMatchesPatterns		PatternsMessages where an attachment's file name contains text patterns that match the specified regular expressions.
Any attachment's file extension matches
Any attachment > file extension includes these words		AttachmentExtensionMatchesWords
ExceptIfAttachmentExtensionMatchesWords		WordsMessages where an attachment's file extension matches any of the specified words.
Any attachment is greater than or equal to
Any attachment > size is greater than or equal to		AttachmentSizeOver
ExceptIfAttachmentSizeOver		SizeMessages where any attachment is greater than or equal to the specified value.
In the EAC, you can only specify the size in kilobytes (KB).
The message didn't complete scanning
Any attachment > didn't complete scanning		AttachmentProcessingLimitExceeded
ExceptIfAttachmentProcessingLimitExceeded		n/aMessages where the rules engine couldn't complete the scanning of the attachments. You can use this condition to create rules that work together to identify and process messages where the content couldn't be fully scanned.
Any attachment has executable content
Any attachment > has executable content		AttachmentHasExecutableContent
ExceptIfAttachmentHasExecutableContent		n/aMessages where an attachment is an executable file. The system inspects the file's properties rather than relying on the file's extension.
Any attachment is password protected
Any attachment > is password protected		AttachmentIsPasswordProtected
ExceptIfAttachmentIsPasswordProtected		n/aMessages where an attachment is password protected (and therefore can't be scanned). Password detection only works for Office documents and .zip files.
has these properties, including any of these words
Any attachment > has these properties, including any of these words		AttachmentPropertyContainsWords
ExceptIfAttachmentPropertyContainsWords		First property: DocumentProperties
Second property: Words		Messages where the specified property of an attached Office document contains the specified words.
This condition helps you integrate mail flow rules with SharePoint, File Classification Infrastructure (FCI) in Windows Server 2012 R2 or later, or a third-party classification system.
You can select from a list of built-in properties, or specify a custom property.

Any recipients

The conditions and exceptions in this section provide a unique capability that affects all recipients when the message contains at least one of the specified recipients. For example, let's say you have a rule that rejects messages. If you use a recipient condition from the Recipients section, the message is only rejected for those specified recipients. For example, if the rule finds the specified recipient in a message, but the message contains five other recipients. The message is rejected for that one recipient, and is delivered to the five other recipients.

If you add a recipient condition from this section, that same message is rejected for the detected recipient and the five other recipients.

Conversely, a recipient exception from this section prevents the rule action from being applied to all recipients of the message, not just for the detected recipients.

Note: This condition doesn't consider messages that are sent to recipient proxy addresses. It only matches messages that are sent to the recipient's primary email address.

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
Any recipient address includes
Any recipient > address includes any of these words		AnyOfRecipientAddressContainsWords
ExceptIfAnyOfRecipientAddressContainsWords		WordsMessages that contain the specified words in the To, Cc, or Bcc fields of the message.
Any recipient address matches
Any recipient > address matches any of these text patterns		AnyOfRecipientAddressMatchesPatterns
ExceptIfAnyOfRecipientAddressMatchesPatterns		PatternsMessages where the To, Cc, or Bcc fields contain text patterns that match the specified regular expressions.

Message sensitive information types, To and Cc values, size, and character sets

The conditions in this section that look for values in the To and Cc fields behave like the conditions in the Any recipients section (all recipients of the message are affected by the rule, not just the detected recipients).

Notes:

  • The recipient conditions in this section do not consider messages that are sent to recipient proxy addresses. They only match messages that are sent to the recipient's primary email address.

  • For more information about using Microsoft 365 groups with the recipient conditions in this section, see the Addresses entry in the Property types section.

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The message contains sensitive information
The message > contains any of these types of sensitive information		MessageContainsDataClassifications
ExceptIfMessageContainsDataClassifications		SensitiveInformationTypesMessages that contain sensitive information as defined by data loss prevention (DLP) policies.
This condition is required for rules that use the Notify the sender with a Policy Tip (NotifySender) action.
Note: This condition/exception isn't available in standalone Exchange Online Protection (EOP) environments.
The To box contains
The message > To box contains this person		AnyOfToHeader
ExceptIfAnyOfToHeader		AddressesMessages where the To field includes any of the specified recipients.
The To box contains a member of
The message > To box contains a member of this group		AnyOfToHeaderMemberOf
ExceptIfAnyOfToHeaderMemberOf		AddressesMessages where the To field contains a recipient who is a member of the specified distribution group, mail-enabled security group, or Microsoft 365 group.
The Cc box contains
The message > Cc box contains this person		AnyOfCcHeader
ExceptIfAnyOfCcHeader		AddressesMessages where the Cc field includes any of the specified recipients.
The Cc box contains a member of
The message > contains a member of this group		AnyOfCcHeaderMemberOf
ExceptIfAnyOfCcHeaderMemberOf		AddressesMessages where the Cc field contains a recipient who is a member of the specified distribution group or mail-enabled security group.
The To or Cc box contains
The message > To or Cc box contains this person		AnyOfToCcHeader
ExceptIfAnyOfToCcHeader		AddressesMessages where the To or Cc fields contain any of the specified recipients.
The To or Cc box contains a member of
The message > To or Cc box contains a member of this group		AnyOfToCcHeaderMemberOf
ExceptIfAnyOfToCcHeaderMemberOf		AddressesMessages where the To or Cc fields contain a recipient who is a member of the specified distribution group or mail-enabled security group.
The message size is greater than or equal to
The message > size is greater than or equal to		MessageSizeOver
ExceptIfMessageSizeOver		SizeMessages where the total size (message plus attachments) is greater than or equal to the specified value.
In the EAC, you can only specify the size in kilobytes (KB).
Note: Message size limits on mailboxes are evaluated before mail flow rules. A message that's too large for a mailbox will be rejected before a rule with this condition is able to act on the message.
The message character set name includes any of these words
The message > character set name includes any of these words		ContentCharacterSetContainsWords
ExceptIfContentCharacterSetContainsWords		CharacterSetsMessages that have any of the specified character set names.

Sender and recipient

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The sender is one of the recipient's
The sender and the recipient > the sender's relationship to a recipient is		SenderManagementRelationship
ExceptIfSenderManagementRelationship		ManagementRelationshipMessages where the either sender is the manager of a recipient, or the sender is managed by a recipient.
The message is between members of these groups
The sender and the recipient > the message is between members of these groups		BetweenMemberOf1 and BetweenMemberOf2
ExceptIfBetweenMemberOf1 and ExceptIfBetweenMemberOf2		AddressesMessages that are sent between members of the specified distribution groups or mail-enabled security groups.
For more information about using Microsoft 365 groups with this condition, see the Addresses entry in the Property types section.
The manager of the sender or recipient is
The sender and the recipient > the manager of the sender or recipient is this person		ManagerForEvaluatedUser and ManagerAddress
ExceptIfManagerForEvaluatedUser and ExceptIfManagerAddress		First property: EvaluatedUser
Second property: Addresses		Messages where either a specified user is the manager of the sender, or a specified user is the manager of a recipient.
The sender's and any recipient's property compares as
The sender and the recipient > the sender and recipient property compares as		ADAttributeComparisonAttribute and ADComparisonOperator
ExceptIfADAttributeComparisonAttribute and ExceptIfADComparisonOperator		First property: ADAttribute
Second property: Evaluation		Messages where the specified Active Directory attribute for the sender and recipient either match or don't match.

Message properties

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
The message type is
The message properties > include the message type		MessageTypeMatches
ExceptIfMessageTypeMatches		MessageTypeMessages of the specified type.
Note: When Outlook or Outlook on the web (formerly known as Outlook Web App) is configured to forward a message, the ForwardingSmtpAddress property is added to the message. The message type isn't changed to AutoForward.
The message is classified as
The message properties > include this classification		HasClassification
ExceptIfHasClassification		MessageClassificationMessages that have the specified message classification. This is a custom message classification that you can create in your organization by using the New-MessageClassification cmdlet.
Note: This condition/exception isn't available in standalone Exchange Online Protection (EOP) environments.
The message isn't marked with any classifications
The message properties > don't include any classification		HasNoClassification
ExceptIfHasNoClassification		n/aMessages that don't have a message classification.
Note: This condition/exception isn't available in standalone Exchange Online Protection (EOP) environments.
The message importance is set to
The message properties > include the importance level		WithImportance
ExceptIfWithImportance		ImportanceMessages that are marked with the specified Importance level.

Message headers

Note

The search for words or text patterns in the subject or other header fields in the message occurs after the message has been decoded from the MIME content transfer encoding method that was used to transmit the binary message between SMTP servers in ASCII text. You can't use conditions or exceptions to search for the raw (typically, Base64) encoded values of the subject or other header fields in messages.

Condition or exception in the EACCondition and exception parameters in Exchange Online PowerShellProperty typeDescription
A message header includes
A message header > includes any of these words		HeaderContainsMessageHeader and HeaderContainsWords
ExceptIfHeaderContainsMessageHeader and ExceptIfHeaderContainsWords		First property: MessageHeaderField
Second property: Words		Messages that contain the specified header field, and the value of that header field contains the specified words.
The name of the header field and the value of the header field are always used together.
A message header matches
A message header > matches these text patterns		HeaderMatchesMessageHeader and HeaderMatchesPatterns
ExceptIfHeaderMatchesMessageHeader and ExceptIfHeaderMatchesPatterns		First property: MessageHeaderField
Second property: Patterns		Messages that contain the specified header field, and the value of that header field contains the specified regular expressions.
The name of the header field and the value of the header field are always used together.

Property types

Send Message To Ip Address

The property types that are used in conditions and exceptions are described in the following table.

Note

If the property is a string, trailing spaces are not allowed.

Property typeValid valuesDescription
ADAttributeSelect from a predefined list of Active Directory attributesYou can check against any of the following Active Directory attributes:
City
Company
Country
CustomAttribute1 - CustomAttribute15
Department
DisplayName
Email
FaxNumber
FirstName
HomePhoneNumber
Initials
LastName
Manager
MobileNumber
Notes
Office
OtherFaxNumber
OtherHomePhoneNumber
OtherPhoneNumber
PagerNumber
PhoneNumber
POBox
State
Street
Title
UserLogonName
ZipCode
In the EAC, to specify multiple words or text patterns for the same attribute, separate the values with commas. For example, the value San Francisco,Palo Alto for the City attribute looks for 'City equals San Francisco' or City equals Palo Alto'.
In Exchange Online PowerShell, use the syntax 'AttributeName1:Value1,Value 2 with spaces,Value3...','AttributeName2:Word4,Value 5 with spaces,Value6...', where Value is the word or text pattern that you want to match. For example, 'City:San Francisco,Palo Alto' or 'City:San Francisco,Palo Alto', 'Department:Sales,Finance'.
When you specify multiple attributes, or multiple values for the same attribute, the or operator is used. Don't use values with leading or trailing spaces.
Note that the Country attribute requires the two-letter ISO 3166-1 country code value (for example, DE for Germany). For more information, see Country Codes - ISO 3166.
AddressesExchange Online recipientsDepending on the nature of the condition or exception, you might be able to specify any mail-enabled object in the organization (for example, recipient-related conditions), or you might be limited to a specific object type (for example, groups for group membership conditions). And, the condition or exception might require one value, or allow multiple values.
In Exchange Online PowerShell, separate multiple values by commas.
This condition doesn't consider messages that are sent to recipient proxy addresses. It only matches messages that are sent to the recipient's primary email address.
The recipient picker in the EAC doesn't allow you to select Microsoft 365 groups from the list of recipients. But, you can enter the email address of a Microsoft 365 group in the box next to Check names, and then validate the email address by clicking Check names, which will add the group to the add box.
CharacterSetsArray of character set namesOne or more content character sets that exist in a message. For example: Arabic/iso-8859-6
Chinese/big5
Chinese/euc-cn
Chinese/euc-tw
Chinese/gb2312
Chinese/iso-2022-cn
Cyrillic/iso-8859-5
Cyrillic/koi8-r
Cyrillic/windows-1251
Greek/iso-8859-7
Hebrew/iso-8859-8
Japanese/euc-jp
Japanese/iso-022-jp
Japanese/shift-jis
Korean/euc-kr
Korean/johab
Korean/ks_c_5601-1987
Turkish/windows-1254
Turkish/iso-8859-9
Vietnamese/tcvn
DomainNameArray of SMTP domainsFor example, contoso.com or eu.contoso.com.
In Exchange Online PowerShell, you can specify multiple domains separated by commas.
EvaluatedUserSingle value of Sender or RecipientSpecifies whether the rule is looking for the manager of the sender or the manager of the recipient.
EvaluationSingle value of Equal or Not equal (NotEqual)When comparing the Active Directory attribute of the sender and recipients, this specifies whether the values should match, or not match.
ImportanceSingle value of Low, Normal, or HighThe Importance level that was assigned to the message by the sender in Outlook or Outlook on the web.
IPAddressRangesArray of IP addresses or address rangesYou enter the IPv4 addresses using the following syntax:
• Single IP address: For example, 192.168.1.1.
• IP address range: For example, 192.168.0.1-192.168.0.254.
• Classless InterDomain Routing (CIDR) IP address range: For example, 192.168.0.1/25.
In Exchange Online PowerShell, you can specify multiple IP addresses or ranges separated by commas.
ManagementRelationshipSingle value of Manager or Direct report (DirectReport)Specifies the relationship between the sender and any of the recipients. The rule checks the Manager attribute in Active Directory to see if the sender is the manager of a recipient, or if the sender is managed by a recipient.
MessageClassificationSingle message classificationIn the EAC, you select from the list of message classifications that you've created.
In Exchange Online PowerShell, you use the Get-MessageClassification cmdlet to identify the message classification. For example, use the following command to search for messages with the Company Internal classification and prepend the message subject with the value CompanyInternal: New-TransportRule 'Rule Name' -HasClassification @(Get-MessageClassification 'Company Internal').Identity -PrependSubject 'CompanyInternal'
MessageHeaderFieldSingle stringSpecifies the name of the header field. The name of the header field is always paired with the value in the header field (word or text pattern match).The message header is a collection of required and optional header fields in the message. Examples of header fields are To, From, Received, and Content-Type. Official header fields are defined in RFC 5322. Unofficial header fields start with X- and are known as X-headers.
MessageTypeSingle message type valueSpecifies one of the following message types:
• Automatic reply (OOF)
• Auto-forward (AutoForward)
• Encrypted
• Calendaring
• Permission controlled (PermissionControlled)
• Voicemail
• Signed
• Approval request (ApprovalRequest)
• Read receipt (ReadReceipt)
Note: When Outlook or Outlook on the web is configured to forward a message, the ForwardingSmtpAddress property is added to the message. The message type isn't changed to AutoForward.
PatternsArray of regular expressionsSpecifies one or more regular expressions that are used to identify text patterns in values. For more information, see Regular Expression Syntax.
In Exchange Online PowerShell, you specify multiple regular expressions separated by commas, and you enclose each regular expression in quotation marks (').
SCLValueOne of the following values:
• Bypass spam filtering (-1)
• Integers 0 through 9		Specifies the spam confidence level (SCL) that's assigned to a message. A higher SCL value indicates that a message is more likely to be spam.
SensitiveInformationTypesArray of sensitive information typesSpecifies one or more sensitive information types that are defined in your organization. For a list of built-in sensitive information types, see Sensitive information types in Exchange Server.
In Exchange Online PowerShell, use the syntax @{},@{},.... For example, to look for content that contains at least two credit card numbers, and at least one ABA routing number, use the value @{Name='Credit Card Number'; minCount='2'},@{Name='ABA Routing Number'; minCount='1'}.
SizeSingle size valueSpecifies the size of an attachment or the whole message.
In the EAC, you can only specify the size in kilobytes (KB).
In Exchange Online PowerShell, when you enter a value, qualify the value with one of the following units:
• B (bytes)
• KB (kilobytes)
• MB (megabytes)
• GB (gigabytes)
For example, 20 MB. Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.
SupervisionListSingle value of Allow or BlockSupervision policies were a feature in Live@edu that allowed you to control who could send mail to and receive mail from users in your organization (for example, the closed campus and anti-bullying policies). In Microsoft 365 and Office 365, you can't configure supervision list entries on mailboxes.
UserScopeFromSingle value of Inside the organization (InOrganization) or Outside the organization (NotInOrganization)A sender is considered to be inside the organization if either of the following conditions is true:
• The sender is a mailbox, mail user, group, or mail-enabled public folder that exists inside the organization.
• The sender's email address is in an accepted domain that's configured as an authoritative domain or an internal relay domain, and the message was sent or received over an authenticated connection. For more information about accepted domains, see Manage accepted domains in Exchange Online.
A sender is considered to be outside the organization if either of the following conditions is true:
• The sender's email address isn't in an accepted domain.
• The sender's email address is in an accepted domain that's configured as an external relay domain.
Note: To determine whether mail contacts are considered to be inside or outside the organization, the sender's address is compared with the organization's accepted domains.
UserScopeToOne of the following values:
• Inside the organization (InOrganization)
• Outside the organization (NotInOrganization)		A recipient is considered to be inside the organization if either of the following conditions is true:
• The recipient is a mailbox, mail user, group, or mail-enabled public folder that exists inside the organization.
• The recipient's email address is in an accepted domain that's configured as an authoritative domain or an internal relay domain, and the message was sent or received over an authenticated connection.
A recipient is considered to be outside the organization if either of the following conditions is true:
• The recipient's email address isn't in an accepted domain.
• The recipient's email address is in an accepted domain that's configured as an external relay domain.
WordsArray of stringsSpecifies one or more words to look for. The words aren't case-sensitive, and can be surrounded by spaces and punctuation marks. Wildcards and partial matches aren't supported. For example, 'contoso' matches ' Contoso'.
However, if the text is surrounded by other characters, it isn't considered a match. For example, 'contoso' doesn't match the following values:
• Acontoso
• Contosoa
• Acontosob
The asterisk (*) is treated as a literal character, and isn't used as a wildcard character.

For more information





broken image
PreviousNext
Cookie Use
We use cookies to improve browsing experience, security, and data collection. By accepting, you agree to the use of cookies for advertising and analytics. You can change your cookie settings at any time. Learn More
Accept all
Settings
Decline All
Cookie Settings
Necessary Cookies
These cookies enable core functionality such as security, network management, and accessibility. These cookies can’t be switched off.
Analytics Cookies
These cookies help us better understand how visitors interact with our website and help us discover errors.
Preferences Cookies
These cookies allow the website to remember choices you've made to provide enhanced functionality and personalization.
Save