Android Debug Bridge (adb) is a command-line tool that lets you run commands on the connected Android device or an emulator. It is widely used for development purposes and is already available in Android Studio in android sdk/platform-tools. The commands which are run on the device through ADB are called 'adb commands'. Here we are going to have a look at the complete list of adb and fastboot commands and what actions they perform.
Adb devices -l. In response, adb prints this status information for each device: Serial number: A string created by adb to uniquely identify the device by its port number. Here's an example serial number: emulator-5554; State: The connection state of the device can be one of the following. Change the USB mode to 'file transfer (MTP)' mode. Enter the following command to launch the ADB daemon: adb devices. You should now see your device's serial number in the Terminal. Apr 04, 2019 Type 'adb devices' and hit enter to launch the ADB daemon. Change the USB mode to 'file. You should see the device serial number on the macOS's. Is there an android shell or adb command that I could use to get a device's IMEI/MEID? Reboot device and enter.#06# into the dialer. Change Serial number on your android mobile to hide its identity over the network and over the various app servers that uses your device serial number. We have a lot of tutorials on Droidfeats to show you how to access certain features on Android smartphones. First of all, install the Tasker app on your Android device. It's a paid app, but well worth the price. Next, set up ADB on your computer and connect your Android device to the computer. To verify the connection, run adb devices in the Terminal/CMD window, and hit enter. If it returns a serial number then you are good to go.
Table of Contents
- 2 List of ADB Commands and their Functions
- 4 List of Fastboot Commands and their Operations
How Android Debug Bridge (adb) works?
According to Wikipedia, the adbd daemon runs on the device and the adb client starts a background server to multiplex commands sent to the connected device.
Below is the list of adb commands and fastboot commands along with the description of what operations it performs.
List of ADB Commands and their Functions
adb devices
This command prints a list of all attached devices with USB Debugging enabled. In response, it returns the serial number and state of the device.
Syntax:
Response:
a123a456 device
adb forward
This command forwards the socket connections. It required USB Debugging enabled on the device.
Syntax:
Example:
Set up forwarding of the host port 6100 to emulator/device port 7100
adb kill-server
It terminates the adb server process. Sometimes you might want to terminate the adb server and restart it to resolve the problems.
Syntax:
adb connect
The adb connect command allows using adb over Wi-Fi. It requires the host and the device connected to the same Wi-Fi network.
Syntax:
To use ADB over Wi-Fi, firstly connect the device to PC and set TCP IP port to 5555 using 'adb tcpip 5555' command. Now find the IP address of the device from Settings -> About -> Status -> IP address. Now you can use adb connect command to use ADB over Wi-Fi.
Example:
adb usb
Restarts ADB in USB mode.
Syntax:
adb install
The adb install command pushes an Android application (.apk) from host to an emulator or the device.
Syntax:
Example:
adb uninstall
Uninstalls or removes the package from the emulator or Android device.
Syntax:
Example:
adb shell pm list packages
The adb shell pm list packages command prints all packages installed on the device/emulator.
Syntax:
Example:
adb shell pm path
The adb shell pm path command is used to prints the path to the APK of the given package.
Syntax:
Example:
adb shell pm clear
This command deletes all the data associated with the package (clears app data and cache).
Syntax:
Example:
adb pull
Downloads or pulls a specified file from an emulator/device to your computer (host).
Syntax:
Example:
To download test.mp4 to drive D below command is used.
adb push
The adb push command is used to upload or push or copy a file from the host (computer) to an emulator or the device.
https://kpyrx.over-blog.com/2021/01/buy-microsoft-office-2018-online.html. Syntax:
Example:
adb shell ls
Lists directory contents.
Syntax:
Example:
adb shell cd
Change the directory or folder.
Syntax:
Example:
adb shell rm
The adb shell rm command is used to remove files or directories.
Syntax:
Example:
adb shell mkdir
Make a directory or create a folder.
Syntax:
Example:
adb shell touch
Create an empty file or change file timestamps.
Syntax:
Example:
adb shell pwd
Prints the current working directory location.
Youtube downloader for mac os x 10.5 8. Syntax:
Example:
adb shell cp
Copy files and directories.
Fallout 4 ps4 god mode mod. Syntax:
Example:
adb shell mv
Move or rename files.
Adb Connect To Device Usb
Syntax:
Example:
adb shell netstat
Shows network statistics.
Syntax:
Example:
adb shell ping
Test the connection and the latency between two network connections.
Syntax:
Example:
adb shell netcfg
Manage and configure network connections via profiles.
Syntax:
Example:
adb shell ip
Show, manipulate routing, devices, policy routing, and tunnels.
Syntax:
object := { link | addr | addrlabel | route | rule | neigh | ntable |tunnel | tuntap | maddr | mroute | mrule | monitor | xfrm |netns | l2tp }
Syntax:
Example:
adb shell cd
Change the directory or folder.
Syntax:
Example:
adb shell rm
The adb shell rm command is used to remove files or directories.
Syntax:
Example:
adb shell mkdir
Make a directory or create a folder.
Syntax:
Example:
adb shell touch
Create an empty file or change file timestamps.
Syntax:
Example:
adb shell pwd
Prints the current working directory location.
Youtube downloader for mac os x 10.5 8. Syntax:
Example:
adb shell cp
Copy files and directories.
Fallout 4 ps4 god mode mod. Syntax:
Example:
adb shell mv
Move or rename files.
Adb Connect To Device Usb
Syntax:
Example:
adb shell netstat
Shows network statistics.
Syntax:
Example:
adb shell ping
Test the connection and the latency between two network connections.
Syntax:
Example:
adb shell netcfg
Manage and configure network connections via profiles.
Syntax:
Example:
adb shell ip
Show, manipulate routing, devices, policy routing, and tunnels.
Syntax:
object := { link | addr | addrlabel | route | rule | neigh | ntable |tunnel | tuntap | maddr | mroute | mrule | monitor | xfrm |netns | l2tp }
optoins := { -V[ersion] | -s[tatistics] | -d[etails] | -r[esolve] |-f[amily] { inet | inet6 | ipx | dnet | link } |-l[oops] { maximum-addr-flush-attempts } |-o[neline] | -t[imestamp] | -b[atch] [filename] |-rc[vbuf] [size]}
Example:
adb logcat
Prints log data on the screen.
Syntax:
adb shell dumpsys
Dumps system data.
Syntax:
Example:
adb shell dumpstate
Dumps state.
Syntax:
adb shell screencap
Parallels desktop 13 13 0 0. The adb shell screencap command takes a screenshot of the device's display.
Adb Change Device Serial Number List
Syntax: App store notes free.
Example:
adb shell screenrecord
The adb shell screenrecord command records the device's screen. It requires the device to be running on Android 4.4 (API level 19) or higher.
Syntax:
Example:
adb root
The adb root command is used to restarts the adbd daemon with root permissions.
Syntax:
adb sideload
Sideloads OTA update.zip package and other files on the device. Know more about adb sideload here.
Syntax:
Example:
adb shell ps
Prints process status.
Syntax:
Example:
adb shell top
Displays top CPU processes.
Syntax:
Example:
adb shell getprop
Get property via the android property service.
Syntax:
Example:
adb shell setprop
This command is used to set property service.
Syntax:
Example:
What is Fastboot?
Fastboot is a diagnostic protocol primarily used to modify the flash filesystem via USB connection from the host computer. It requires the device to be booted into boot loader mode or fastboot mode or secondary program loader mode. Once the fastboot protocol is enabled, it accepts the commands sent to it via USB using the command-line interface.
List of Fastboot Commands and their Operations
Below is the list of fastboot commands which can be used to perform certain operations when the device is connected to the computer (host) in Fastboot mode / Bootloader mode.
fastboot devices
This command is similar to adb devices; it prints a list of all attached devices in fastboot mode. Onimusha psp game download. In response, it returns the serial number of the device.
Syntax:
fastboot reboot
The fastboot reboot command reboots the device to normal or standard mode. Used to exit the fastboot mode or boot loader mode.
Syntax:
fastboot reboot recovery
The fastboot reboot recovery command boots the device into Recovery Mode.
Syntax:
fastboot oem unlock
The fastboot oem unlock command unlocks bootloader on the device.
Syntax:
fastboot oem lock
Used to relock the bootloader on the device.
Syntax:
fastboot oem device-info
Prints bootloader lock/unlock status.
Syntax:
fastboot flash recovery
Adb Change Device Serial Numbers
The fastboot flash recovery command is used to flash the recovery image to the device.
Syntax:
Example:
fastboot boot
Used to boot the image file without installing or flashing on the device. Can be used to boot recovery image without flashing on the device.
Syntax:
Example:
fastboot flash
Flashes flashable zip file from fastboot or bootloader mode.
Syntax:
Example:
fastboot getvar cid
Displays CID (Carrier ID) of the device.
Syntax:
This was the complete list of ADB and Fastboot commands. However, to use the above fastboot and adb commands, make sure you have installed ADB and Fastboot drivers – Windows and Mac.
If you find this post helpful, then don't forget to share it with your friends on Facebook, Twitter, and other social media platforms.
The Android Debug Bridge (ADB) is a versatile command line tool that lets you communicate with and control an Android-powered device over a USB link from a computer. It comes along with other useful tools and code bundled with the Android Software Development Kit (SDK).
The ADB program includes three components:
- A client, which runs on your development machine. You can invoke a client from a shell by issuing an
adbcommand. Other Android tools such as the ADT plugin and DDMS also create adb clients. - A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
- A daemon, which runs as a background process on each emulator or device instance.
Setting Up ADB
On Windows and Linux
If you installed the Android SDK, the Android Debug Bridge will already be installed along with it. Otherwise, follow our guide on installing the Android SDK.
On Mac
If you have already downloaded the Android SDK, launch the SDK Manager by typing into a Terminal window:
/tools/android
where is the path to the tools directory. For example, if the Android SDK is located on the desktop, then you have to type into the terminal window:
/Users/MyName/Desktop/android-sdk-mac_86/tools/android
As soon as the SDK Manager is launched, click 'Available packages', then 'Android Repository.' When the list of available packages pops up, choose the offered revision of 'Android SDK Platform-tools'. Click 'Install Selected.' If it is installed, the adb executable binary will be located in the platform-tools subdirectory.
If you don't have the Android SDK installed yet, download its latest version and unzip it into an appropriate destination folder then follow the instructions above.
We want to make sure that ADB is now working. First, see to it that your Android device is set up for debugging. On your Android device running Gingerbread, go to the Settings > Applications > Development screen and make sure 'USB Debugging' is checked. If you're already on Ice Cream Sandwich, go to Settings > Developer options and tick 'Android debugging' or 'USB debugging.'
Connect your computer and Android device with a USB cable. Then, open a terminal on your computer and run the following command:
adb devices
You should see something like this:
List of devices attached
XXXXXXXXXXXX device
A result like that (where the X's represent your device's actual serial number) confirms that your ADB is set up and working.
Learning the Codes
Now that ADB is already set up on your machine, you might want to know how to use its various flags and command options.
Flags
- -d
- directs command to the only connected USB device; returns an error if more than one USB device is present.
- -e
- directs command to the only running emulator; returns an error if more than one emulator is running.
- -s
- directs command to the USB device or emulator with the given serial number. Overrides ANDROID_SERIAL environment variable.
- -p
- simple product name like ‘sooner', or a relative/absolute path to a product out directory like ‘out/target/product/sooner'. If
-pis not specified, the ANDROID_PRODUCT_OUT environment variable is used, which must be an absolute path. - devices
- list all connected devices
- connect :
- connect to a device via TCP/IP
- disconnect :
- disconnect from a TCP/IP device
Commands
tcp:localabstract:localreserved:localfilesystem:dev:jdwp:(remote only)
-lmeans forward-lock the app-rmeans reinstall the app, keeping its data-smeans install on SD card instead of internal storage
-k means keep the data and cache directories)Data Options
DATAOPTS:
- (no option)
- don't touch the data partition
- -w
- wipe the data partition
- -d
- flash the data partition
Scripting
- adb wait-for-device
- block until device is online
- adb start-server
- ensure that there is a server running
- adb kill-server
- kill the server if it is running
- adb get-state
- prints: offline | bootloader | device
- adb get-serialno
- prints:
- adb status-window
- continuously print device status for a specified device
- adb remount
- remounts the /system partition on the device read-write
- adb reboot [bootloader|recovery]
- reboots the device, optionally into the bootloader or recovery program
- adb reboot-bootloader
- reboots the device into the bootloader
- adb root
- restarts the adbd daemon with root permissions
- adb usb
- restarts the adbd daemon listening on USB
- adb tcpip
- restarts the adbd daemon listening on TCP on the specified port
Networking
refers to the tty for PPP stream. Eg.dev:/dev/omap_csmi_tty1[parameters]– Eg.defaultroute debug dump local notty usepeerdns
Sync
- If is not specified, both /system and /data partitions will be updated.
- If it is 'system' or 'data', only the corresponding partition is updated.
Once you already have ADB set up and functioning on your computer, you can start using it for a lot of important Android-related tasks, such as creating Android apps, debugging Android apps, and rooting your Android phone. Where is the design tab in powerpoint 2011 for mac. Check out our how-to guides for rooting your Android phones.
